A single coat system or finishing coat for protecting and embellishing metal objects
that are regularly exposed to high temperatures (350 to 600°C).
|Colours: other colours available on request (volume dependent)||White, Satin Black, Metallic Black, Anthracite, Indian Summer, Mokka, Coffee, Shadow Grey, Mystic Grey, Magnolia, Flat Black|
|Appearance when dry||Satin, matt|
|Max operating temperature||350°C – 600°C colour dependant|
|Solid matter content (by weight) depending on formulation||60 – 80%|
|Surface preparation||Good results can be obtained with thorough degreasing, cleaning and mechanical removal of all traces of rust but surface blasting in accordance with SA 2 ½ is necessary.|
|Application||Apply using a low pressure pneumatic spray gun (with or without electrostatic spraying equipment).|
|Application conditions||+5°C and surface temperature at 3°C above dew point|
|Theoretical coverage||15-18 m²/L for dry film thickness of 35 μm|
|Recommended film thickness||30 – 40 μm (higher film thicknesses can lead to loss of adhesion when exposed to high temperatures).|
|Recommended drying conditions||Air drying system. Optimum properties (fully cured, chemical resistance to oil, diesel and gasoline) will only apply after heating above 220°C for 3 days.|
|Shelf Life / Storage Conditions|
(+5C° < T < 35°)
|6 months in original unopened packaging, protected from moisture, extreme cold and excessive heat.|
Established in 1969 PLPCOATINGS has continually extended its knowledge in a diverse range of surface treatments. All products are a result of extensive research and development and currently used by Europe’s leading manufacturers.