Paint system providing attractive finishes for heating and electrical equipment (such as toasters and other kitchen equipment) that are regularly exposed to temperatures up to 300°C.
|Colours: other colours available on request (volume dependent)||Rouge Brilliant, Sand Beige, Champagne, Pearl White, Noir Brilliant|
|Appearance when dry||High gloss (satin and matt appearance available on request).|
|Packaging||5KG / 20 KG|
|Max operating temperature||200-300°C, depending on formulation and colour.|
|Solid matter content (by weight) depending on formulation||50 to 75%|
Good results can be obtained with thorough degreasing, cleaning and mechanical removal of all traces of rust but
|Application||Apply using a low pressure pneumatic spray gun (with or without electrostatic spraying equipment).|
|Application conditions||+5°C and surface temperature at 3°C above dew point.|
|Theoretical coverage||10-20 m²/L for dry film thickness of 25 μm|
|Recommended film thickness||15 – 25 μm (higher film thickness may result in boiling defects and loss of adhesion after heating).|
|Recommended drying conditions||Oven drying. Minimum 30 minutes at 250°C.|
|Shelf Life / Storage Conditions|
( +5C°< T <35°)
|6 months in original unopened packaging, protected from moisture, extreme cold and excessive heat.|
Established in 1969 PLPCOATINGS has continually extended its knowledge in a diverse range of surface treatments. All products are a result of extensive research and development and currently used by Europe’s leading manufacturers.