A single coat system or finishing coat for protecting and embellishing metal objects
that are regularly exposed to high temperatures (350 to 600°C)
|Colours: other colours available on request (volume dependent)||Dark Black, Anthracite|
|Appearance when dry||Matt|
|Max operating temperature||500°C|
|Solid matter content (by weight) depending on formulation||45% (± 5%)|
Good results can be obtained with thorough degreasing, cleaning and mechanical removal of all traces of rust but surface blasting in accordance with SA 2 ½ is advised.
|Application||Apply using a low pressure pneumatic spray gun. Dipping application is also possible (special formula).|
|Application conditions||Substrate temperature and ambient temperature at minimum +10°C in order to achieve fast drying. Relative humidity < 70%. These conditions should be maintained during the drying cycle.|
|Theoretical coverage (depending on formulation)||App. 11-14 m²/L for dry film thickness of 25 μm|
|Recommended film thickness||25 (± 5) μm|
|Recommended drying conditions||Air drying system. Optimum properties (fully cured, chemical resistance to oil, diesel and gasoline) will only apply after heating above 220°C for at least 60 minutes.|
|Shelf Life / Storage Conditions|
|6 months in original unopened packaging, protected from moisture, extreme cold and excessive heat.|
Established in 1969 PLPCOATINGS has continually extended its knowledge in a diverse range of surface treatments.
All products are a result of extensive research and development and currently used by Europe’s leading manufacturers.