Suitable for use as a dual coat system for protecting and embellishing metal objects that are regularly exposed to high temperatures (300 to 600°C) such as fitted hearths, stoves, barbecue stands, car exhausts, sauna’s, etc.
|Appearance when dry||Mat|
|Packaging||5KG / 20 KG|
|Max operating temperature||300°C – 600°C|
|Solid matter content (by weight) depending on formulation||50%|
|Surface preparation||Remove grease, oil and all other surface contaminations
The surface must be clean and dry during application. Surface blasting in accordance with SA 2 ½ is advised
Nonetheless, good results can be obtained with thorough cleaning and mechanical removal of all traces of rust
|Application||Apply using a low pressure conventional spray gun (with or without electrostatic spraying equipment)
Thorough mechanical stirring is recommended in order to obtain a homogenous product
|Application conditions||+5°C and surface temperature at 3°C above dew point|
|Theoretical coverage||15.5 m²/L for dry film thickness of 20 μm|
|Recommended film thickness||20 (± 5) μm|
|Recommended drying conditions||Air drying system. Optimum properties (fully cured, chemical resistance to oil, diesel and gasoline) apply after heating above 220°C for 1 hour. Dust dry after 15 minutes at 20°C|
|Recoatable||1-2 hours at room temperature|
|Shelf Life / Storage Conditions
( +5C°< T <35°)
|6 months in original unopened packaging, protected from moisture, extreme cold and excessive heat|
Established in 1969 PLPCOATINGS has continually extended its knowledge in a diverse range of surface treatments.
All products are a result of extensive research and development and currently used by Europe’s leading manufacturers.