A single coat system or finishing coat for protecting and embellishing metal objects
that are regularly exposed to high temperatures (350 to 600°C).
| Colours: other colours available on request (volume dependent) | White, Satin Black, Metallic Black, Anthracite, Indian Summer, Mokka, Coffee, Shadow Grey, Mystic Grey, Magnolia, Flat Black |
| Appearance when dry | Satin, matt |
| Packaging | 5 KG |
| Max operating temperature | 350°C – 600°C colour dependant |
| Solid matter content (by weight) depending on formulation | 60 – 80% |
| Surface preparation | Good results can be obtained with thorough degreasing, cleaning and mechanical removal of all traces of rust but surface blasting in accordance with SA 2 ½ is necessary. |
| Application | Apply using a low pressure pneumatic spray gun (with or without electrostatic spraying equipment). |
| Application conditions | +5°C and surface temperature at 3°C above dew point |
| Theoretical coverage (depending on formulation) | 15-18 m²/L for dry film thickness of 35 μm |
| Recommended film thickness | 30 – 40 μm (higher film thicknesses can lead to loss of adhesion when exposed to high temperatures). |
| Recommended drying conditions | Air drying system. Optimum properties (fully cured, chemical resistance to oil, diesel and gasoline) will only apply after heating above 220°C for 3 days. |
| Shelf Life / Storage Conditions (+5C° < T < 35°) | 6 months in original unopened packaging, protected from moisture, extreme cold and excessive heat. |
Established in 1969 PLPCOATINGS has continually extended its knowledge in a diverse range of surface treatments.
All products are a result of extensive research and development and currently used by Europe’s leading manufacturers.