A single coat system or finishing coat for protecting and embellishing metal objects
that are regularly exposed to high temperatures (300-600°C)
| Colours: other colours available on request (volume dependent) | 9165 Flat Black, 9175 Medium Black, 9185 Satin Black, 9210 Metallic Black, 9344 Anthracite |
| Appearance when dry | Mat, mat-satin, satin |
| Packaging | 20 KG |
| Max operating temperature | 300°C -600°C colour dependant |
| Solid matter content (by weight) depending on formulation | 30 – 45% |
| Surface preparation | Good results can be obtained with thorough degreasing, cleaning and mechanical removal of all traces of rust but surface blasting in accordance with SA 2 ½ is advised |
| Application | Apply using a low pressure conventional spray gun (with or without electrostatic spraying equipment) |
| Application conditions | +5°C and surface temperature at 3°C above dew point |
| Theoretical coverage (depending on formulation) | 10 -16 m² /L for dry film thickness of 25 μm |
| Recommended film thickness | 25 (± 5) μm |
| Recommended drying conditions | Air drying system. Optimum properties (fully cured, chemical resistance to oil, diesel and gasoline) will only apply after heating above 220°C for at least 60 minutes |
| Shelf Life / Storage Conditions (+5C° < T < 35°) |
6 months in original unopened packaging, protected from moisture, extreme cold and excessive heat |
Established in 1969 PLPCOATINGS has continually extended its knowledge in a diverse range of surface treatments.
All products are a result of extensive research and development and currently used by Europe’s leading manufacturers.